is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Install Cabinet Corner Molding
1 Miter saw
2 Measuring tape
3 Pencil
4 Safety glasses
5 Hearing protection
6 Clamps
7 Nail gun
8 Air compressor
9 Sandpaper
10 Wood glue.

How to Install Cabinet Corner Molding

Step-by-Step Guide: Installing Cabinet Corner Molding Like a Pro

Installing cabinet corner molding is a great way to add a finishing touch to your kitchen or bathroom cabinets. It can give your cabinets a more polished, professional look and can help cover up any gaps or imperfections in the corners. Here's a step-by-step guide on how to install cabinet corner molding:

Step 1: Measure the Length of the Molding
Measure the length of the molding you will need to cover the corners of your cabinets. You can do this by measuring the distance from the top of the cabinet to the bottom of the cabinet, and then adding a few inches to allow for any cuts or angles you may need to make.

Step 2: Cut the Molding to Size
Using a saw, cut the molding to the appropriate length. Be sure to make precise cuts, as any mistakes will be visible once the molding is installed.

Step 3: Sand the Edges of the Molding
Use sandpaper to smooth out any rough edges on the molding. This will help ensure a clean, professional look once the molding is installed.

Step 4: Apply Adhesive to the Molding
Apply a small amount of adhesive to the back of the molding. Be sure to use an adhesive that is appropriate for the type of material your cabinets are made of.

Step 5: Place the Molding on the Cabinet
Carefully place the molding on the corner of the cabinet, making sure it is flush against both sides of the cabinet. Use a level to ensure that the molding is straight.

Step 6: Nail the Molding in Place
Using a nail gun, nail the molding in place. Be sure to use nails that are appropriate for the type of material your cabinets are made of.

Step 7: Fill in any Nail Holes
Use wood putty to fill in any nail holes or gaps in the molding. Once the putty has dried, sand it down to create a smooth surface.

Step 8: Paint or Stain the Molding
If desired, paint or stain the molding to match the color of your cabinets. This will help create a seamless, professional look.

Installing cabinet corner molding may seem like a daunting task, but with the right tools and a little patience, it can be a great DIY project that will add value and beauty to your home.