| Tools and Supplies to Replace Cabinet Knobs | ||||
|---|---|---|---|---|
| 1 | Screwdriver set | |||
| 2 | Cabinet knob template | |||
| 3 | Measuring tape | |||
| 4 | Drill | |||
| 5 | Drill bits | |||
| 6 | Sandpaper | |||
| 7 | Wood filler | |||
| 8 | Putty knife | |||
| 9 | Level | |||
| 10 | Pencil or marker | |||
| 11 | Safety goggles | |||
| 12 | Gloves | |||
| 13 | Dust mask | |||
| 14 | Paint or stain (if desired) | |||
Replacing cabinet knobs is a simple and cost-effective way to give your kitchen or bathroom a fresh new look. Whether you're replacing outdated knobs or just want to switch up the style, the process is relatively easy. Here's a step-by-step guide to help you replace your cabinet knobs:
Step 1: Remove the old knobs
Using a screwdriver, remove the screws that hold the old knobs in place. If the knobs are stuck, gently wiggle them back and forth until they come loose.
Step 2: Measure the distance between the screw holes
Before you purchase new knobs, measure the distance between the screw holes on the back of the old knobs. This will ensure that you purchase knobs that will fit properly.
Step 3: Choose your new knobs
Select new knobs that match the style and finish of your cabinets. You can choose from a wide variety of knobs, including metal, glass, ceramic, and plastic.
Step 4: Install the new knobs
Line up the screw holes on the back of the new knobs with the holes on the cabinet door. Insert the screws through the holes and tighten them with a screwdriver. Be careful not to over-tighten the screws, as this can cause the knobs to crack or break.
Step 5: Test the new knobs
Once you've installed all of the new knobs, test them to make sure they are secure and operate smoothly. If any of the knobs are loose or difficult to turn, use a screwdriver to adjust the screws until they are snug.
In conclusion, replacing cabinet knobs is a quick and easy way to update the look of your cabinets. By following these simple steps, you can replace your old knobs with new ones in no time.