is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Install Cabinet Pulls

Step-by-Step Guide: Installing Cabinet Pulls Made Easy

Installing cabinet pulls is a simple and straightforward process that can be done by anyone with basic DIY skills. Here is a step-by-step guide to help you install cabinet pulls:

Step 1: Measure and Mark

Before you start drilling holes in your cabinets, you need to measure and mark the exact location where you want to install the pulls. Use a measuring tape to determine the center point of the cabinet door or drawer front. Mark this point with a pencil or a piece of masking tape.

Step 2: Drill Holes

Once you have marked the center point, it's time to drill the holes for the cabinet pulls. Use a drill bit that is slightly smaller than the screws that came with the pulls. This will ensure a tight fit for the screws.

Place the drill bit at the center point and drill straight through the cabinet door or drawer front. Be sure to drill all the way through to the other side.

Step 3: Install the Pulls

After you have drilled the holes, it's time to install the cabinet pulls. Insert the screws that came with the pulls into the holes you just drilled. Use a screwdriver to tighten the screws until the pulls are firmly attached to the cabinet.

Step 4: Repeat the Process

Repeat the process for all the cabinet doors and drawer fronts that you want to install pulls on. Be sure to measure and mark each one carefully to ensure that the pulls are installed in the same location on each cabinet.

Step 5: Enjoy Your New Cabinet Pulls

Once you have installed all the cabinet pulls, step back and admire your work. Your cabinets will look new and refreshed with the addition of these simple accessories.

In conclusion, installing cabinet pulls is a quick and easy DIY project that can be done in just a few hours. With the right tools and a little bit of patience, anyone can add these stylish and functional accessories to their cabinets.